Toilet Fill Valve and Flapper Replacement in Westchester Park

A constantly running toilet is one of those problems that's easy to ignore - until you see your water bill. Most of the time, the culprit is something small. A worn fill valve or a degraded flapper. Two parts that cost very little to replace but can waste a surprising amount of water every single day if left alone.

That's exactly what we were dealing with on this job in Westchester Park. The toilet had been running and flushing weakly for a while. Once we popped the tank lid, it was clear what was going on. The old fill valve was worn out and the flapper wasn't sealing the way it should. Both had to go.

We swapped out the fill valve and flapper with fresh components - and just like that, the toilet was back to doing its job properly. Strong flush, no running, no wasted water. It's one of those repairs that feels almost too simple, but the difference it makes is immediate.

The thing about toilet tank parts is that they wear down gradually. You might not notice the toilet running at first, or you chalk up the weak flush to "just how it is." But those small symptoms are worth paying attention to. Catching this stuff early keeps a minor fix from turning into a bigger plumbing headache.

If your toilet has been acting up - running between flushes, taking forever to refill, or just not flushing with any real force - it's probably something we can sort out quickly. Toilet repair is one of the most common calls we get, and nine times out of ten it's a straightforward fix.